Hover the mouse at the top of the screen to select which motion area you would like to configure. You should now be receiving motion detection alert snapshots.Īreas enabled for motion detection are shown in color and areas that are disabled are transparent. This way motion detection is not triggered until after the person / object enters the frame.Ĭonfigure the sensitivity and threshold of each zone by clicking the zone's color at the top of the screen. RECOMMEND: Remove the motion detect region from the outer border of the screen.
Use the grid on the monitor to enable the area where motion detection is required. Right-click on the Live View to access the Quick Menu toolbar.Ĭlick Main Menu and then click the Setting icon ( ).Ĭlick Channel and select the camera to be configured.Ĭlick Setup to configure the areas of the image that will be enabled for motion detection. The following instructions require you to access your system using your DVR / NVR and a monitor. Adjusting the threshold or sensitivity settings can cause a smaller or larger sized object trigger a motion detection event. If you have enabled and configured snapshots settings and they are not recording, you may need to adjust your camera's sensitivity or threshold settings for motion detection.
#Amcrest ip camera cloud setting says no triggers set series
If snapshots are not recording on your LHV / LNR Series DVR / NVR, first check that they are enabled and configured for more information.
0 kommentar(er)
